This file contain CAE and full English video of Under water Eulerian explosion in the depth of water in ABAQUS step by step.With the increased world tension, terrorist bombing attacks or accidental explosions are becoming a large threat to infra-structure such as the important economic, military and civilian facilities. The ...
ادامه نوشته »
FSW problem is a multi-physics problem that includes excessive material deformation and heat flow .In the current work, a coupled Eulerian Lagrangian (CEL) model is developed using Abaqus environment to simulate the two phases of FSW process ( welding).Finite element modelling (FEM) of the FSW process leads to a better ...
ادامه نوشته »
در این ویدئو به شبیه سازی قدم به قدم جوشکاری اصطکاکی به روش اویلری بین دو قطعه تیتانیومی پرداخته ایم. قطعات تیتانیومی به صورت پارت اویلری و قطعه ابزار به صورت پارت لاگرانژی در نظر گرفته شده است. در محیط پراپرتی خواص حرارتی و پلاستیک مورد نیاز برای این آنالیز ...
ادامه نوشته »
This file contain CAE and full English video of Eulerian explosion in the Lagrangian pipe in ABAQUS step by step.An explosive detonated in water is a rapid chemical reaction in a substance, which instantly converts the original material into hot explosion gas with a temperature of approximately 3000C and induces ...
ادامه نوشته »
In this video you can see Simulation blast loading over concrete slab in Abaqus step by step. Concrete is modeled as lagrangian part with Johnson-Cook material plasticity and damage to predict fracture area in slab. JH material is appropriate for blast analysis and high speed deformation. For blast modeling CONWEP ...
ادامه نوشته »
This video explains high velocity impact of a bullet to the concrete wall step by step.Bullet is modeled as a 3 dimensional part with rigid property and concrete as a 3 dimensional part with Johnson-Cook plasticity and damage for predicting fracture area that happened during the analysis.Johnson-Cook material has better ...
ادامه نوشته »
This video explains Explosive(impact)welding between two pipe in Abaqus step by step. The internal pipe or flyer pipe made of Titanium and the external pipe or base pipe made of steel.Two pipe has modeled as axisymmetric part and TNT like them. For modeling TNT behavior JWL equation of state has ...
ادامه نوشته »
In this video you can see Simulation blast loading over concrete slab reinforced by composite layers in Abaqus step by step.With the increased world tension, terrorist bombing attacks or accidental explosions are becoming a large threat to infra-structure such as the important economic, military and civilian facilities. The research on ...
ادامه نوشته »
In this video you will see a step by step video of high velocity impact on to the concrete wall in Abaqus. Bullet modeled as a lagrangian part . For modeling concrete behavior under the impact JHC material has been use. During the analysis bullet penetrate into the concrete wall ...
ادامه نوشته »
در این ویدئو به شبیه سازی قدم به قدم برخورد یک میله فلزی سرعت بالا به یک صفحه بتنی تقویت شده با میلگرد پرداخته ایم. میله به صورت سه بعدی و برای آن از مدل های آسیب فلزات استفاده شده تا خرابی بوجود آمده در آن قابل مشاهده باشد. برای ...
ادامه نوشته »
در این ویدئو به شبیه سازی قدم به قدم رشد ترک به روش XFEM در یک لوله فلزی با استفاده از معیارهای شکست در نرم افزار آباکوس مورد بررسی قرار گرفته است. برای رشد ترک و بررسی پارامترهای مورد نظر آن دو روش وجود دارد که روش اول مرسوم به ...
ادامه نوشته »
FSW problem is a multi-physics problem that includes excessive material deformation and heat flow .In the current work, a coupled Eulerian Lagrangian (CEL) model is developed using Abaqus environment to simulate the two phases of FSW process (plunging and welding).This file contain CAE and English video file step by step ...
ادامه نوشته »
در این ویدئو به شبیه سازی مرحله به مرحله انتقال حرارت در یک لوله دو شاخه در آباکوس CFD پرداخته ایم. هندسه لوله از یک ورودی با دمای بالا و دو خروجی تشکیل شده که که در طی فرآیند دمای ورودی در تماس با دیواره قرار میگیرد و در طول ...
ادامه نوشته »
در این ویدئو به شبیه سازی قدم به قدم حرکت سیال درون یک نازل در آباکوس CFD می پردازیم. جریان سیال هوا بوده که درون یک نازل همگرا واگرای ساده به صورت تقریبا دوبعدی مدل گردیده شده است.به دلیل تقارن فقط نیمی از نازل مدل و در میانه آن دارای ...
ادامه نوشته »
This is a full English video demonstrates the usage of CONWEP blast loading using Abaqus/Explicit over the concrete slab. Concrete modeled as lagrangian part. For modeling behavior of concrete slab Brittle material model has been used. During the analysis TNT waves pressure causes huge stresses on the concrete slab and create ...
ادامه نوشته »
This is full English video step by step explain simulation high velocity impact of a steel projectile into the ceramic-composite plate in Abaqus . During the analysis the projectile penetrate into the plate and removed ceramic elements but the composite elements had a good performance against the steel rod penetration ...
ادامه نوشته »
در این ویدئو به شبیه سازی جریان سیال بر روی یک پره توربین بادی در مقیاس کوچک در آباکوس CFD پرداخته ایم. برای مدل کردن هندسه پره با توجه به پیچیدگی حاکم بر هندسه آن را در نرم افزار سالید ورک مدل و به آباکوس ایمپورت نموده ایم. برای سیال ...
ادامه نوشته »
This file contains CAE and English video of simulation high velocity impact of a bullet onto the steel plate in Abaqus software.For modeling bullet and plate lagrangian formulation has been used. Johnson-Cook material is appropriate for modeling high speed deformation with damage initiation. In this simulation Explicit procedure and general ...
ادامه نوشته »
This file contains CAE and full English video of Explosive Welding between Copper and Aluminium Pipe in Abaqus. Two pipe has modeled as axisymmetric part and TNT like them. For modeling TNT behavior JWL equation of state has been used.Today, major innovations suggest the use of dissimilar material combination to ...
ادامه نوشته »
This video contain CAE and INP and persian video files about sloshing process simulation in Abaqus. for water Us-Up material model has been used and you can see the water wave in the result section You can provide CAE ,INP,and English video files of this simulation here. The cost of ...
ادامه نوشته »
Abaqus tutorials Abaqus tutorials