تمامی مطالب این سایت محفوظ بوده و هر گونه کپی برداری از مطالب این سایت پیگرد قانونی دارد.
خانه / بایگانی برچسب: Holmquist-Johnson

بایگانی برچسب: Holmquist-Johnson

ُSimulation dynamic response of concrete slab sandwich plate under close-range blast loading based on the CEL method

In this tutorial, the ُSimulation dynamic response of concrete slab sandwich plate under close-range blast loading based on the CEL method has been studied. The concrete slab, TNT, and Eulerian domain are modeled as three-dimensional parts. The steel beams are modeled as shell parts. The steel bars are modeled as ...

ادامه نوشته »

Simulation air blast load over aluminum sandwich structure with inner energy absorbers in abaqus

In this tutorial, the simulation air blast load over an aluminum sandwich structure with inner energy absorbers in Abaqus was studied. The two upper and bottom aluminum plates are modeled as dimensional shell parts. The inner energy absorbers are also modeled as three-dimensional parts. You can see a figure of ...

ادامه نوشته »

Simulation CEL explosion over a composite RC column with X-shaped steel core in Abaqus

This tutorial simulated a CEL explosion over a composite RC column with an X-shaped steel core in Abaqus. The concrete and steel X-shaped columns are modeled as three-dimensional solid parts. The steel reinforcements are modeled as wire parts, and the domain that contains explosive charge is modeled as an Eulerian ...

ادامه نوشته »

Simulation air blast explosion over a composite panel(CFRP-Ceramic-GFPP) in Abaqus

Simulation air blast explosion over a composite panel(CFRP-Ceramic-GFPP) in Abaqus has been investigated in this tutorial. The CFRP and Glass fiber Polypropylene are modeled as shell parts with some layers. The ceramic core is modeled as a solid part. You can see a figure of the assembled parts below The ...

ادامه نوشته »

Simulation air blast explosion over an aluminum box reinforced with CFRP layers in Abaqus

Simulation air blast explosion over an aluminum box reinforced with CFRP layers in Abaqus has been studied in this tutorial. The aluminum box is modeled as a three-dimensional solid part. The CFRP layers are modeled as four separated part with different orientations. You can see figures of the assembled parts ...

ادامه نوشته »

Simulation SPH explosion over a composite column(Steel cover+Concrete+CFRP I shape beam) in Abaqus

Simulation SPH explosion over a composite column(Steel cover+Concrete+CFRP I shape beam) in Abaqus has been investigated in the present tutorial. The steel cover and CFRP I shape beam are modeled as three-dimensional shell parts. The concrete and TNT are modeled as three-dimensional solid parts. You can see a figure of ...

ادامه نوشته »

Simulation Johnson–Holmquist-II model of glass under dynamic compression load in Abaqus

Simulation Johnson–Holmquist-II model of glass under dynamic compression load in Abaqus has been studied in this tutorial. The glass is modeled as a three-dimensional solid part. You can see a figure of the assembled parts below Annealed glass is clear and transparent, and its fabrication is inexpensive. Because of its ...

ادامه نوشته »

َAir blast simulation of PEEK/ceramic/gelatin composite for finding behind the armor trauma in Abaqus

In this tutorial, the َAir blast simulation of PEEK/ceramic/gelatin composite for finding behind the armor trauma in Abaqus has been investigated. The polyether-ether-ketone(PEEK) is modeled as a thin solid layer to protect the other layers. The silicon carbide or ceramic is modeled as a three-dimensional solid layer at the middle. ...

ادامه نوشته »

Simulation close explosion test of a glass shield in Abaqus

With the growing threat and risk of attacks and explosions in densely populated urban environments, the need for advanced security glass in windows, doors, police protective galss shield, and glass partitions is also increasing. In a powerful explosion, conventional glass panes will splinter even at a great distance from the ...

ادامه نوشته »

Simulation ballistic impact of steel bullet to the ceramic panel reinfroced with Green Composite

In this tutorial the Simulation ballistic impact of steel bullet to the ceramic panel reinfroced with Green Composite has been investigated. The bullet is modeled as a three-dimensional solid part, the ceramic panel as a solid part, and the green composite as a three-dimensional shell part. You can see a ...

ادامه نوشته »

Abaqus full lecture-High and Low-Velocity Impact- More than ten hours of modeling and simulation

In this lecture, the High and Low-velocity impact phenomenon is investigated. The lecture duration is more than ten hours and during that, twenty different models are simulated based on the research paper as a reference for the material. We define the proper material model for each part for instance in ...

ادامه نوشته »

Simulation of ice damage under underwater near-field explosion by using the CEL method in Abaqus

In this tutorial, the Simulation of ice damage under underwater near-field explosion by using the CEL method in Abaqus has been investigated. The ice is modeled as a three-dimensional solid part. The TNT, air, and water are modeled as three-dimensional Eulerian parts. Due to the extremely short reaction time of ...

ادامه نوشته »

Simulation drilling hole process in concrete by using a rigid drill tool in Abaqus

In this tutorial, the Simulation drilling hole process in the Abaqus by using a rigid drill tool has been studied.  Concrete drilling, or core drilling, is the process of drilling precise holes in concrete floors or walls, or in any other paved surfaces or structures. The concrete is modeled as a three-dimensional solid part. ...

ادامه نوشته »

Numerical simulation of three-point bending of the composite panel(ceramic-Steel-Aluminum) in Abaqus

In this tutorial, Numerical simulation of three-point bending of the composite panel(ceramic-Steel-Aluminum) in Abaqus has been investigated. The ceramic and steel plates are modeled as a three-dimensional solid part. The aluminum core with honeycomb shape is modeled as a three-dimensional shell part. Three rigid bodies are used to define hydraulic ...

ادامه نوشته »

Simulation sandstone cutting by using a rigid tool in Abaqus-Damage investigation

In this tutorial, the Simulation sandstone cutting by using a rigid tool in Abaqus-Damage investigation – has been studied. The stone part is modeled as a three-dimensional solid part. The tool is imported to the Abaqus as a deformable part, but in the interaction section, the rigid constraint has been ...

ادامه نوشته »

Simulation failure of RC members under close-in blast loading in Abaqus

Blast incidents in recent years show that most of the terrorist attacks on public structures were explosions within short stand-off distances. In this context, columns are the most vulnerable structural components and their failure is the primary cause for progressive collapse in framed structures. On the other hand, many of ...

ادامه نوشته »

Simulation rigid impact on granite stone with SPH method in Abaqus- Damage investigation

The material constitutive relationship is not only the conclusion of some regulations summarized from experimental data, but also plays an important role in numerical simulations. It reflects the realistic physical and mechanical properties of materials as much as possible to improve the accuracy of numerical results. At present, various kinds ...

ادامه نوشته »

numerical simulation of blast resistance of square CFDST columns with steel-fibre reinforced concrete in Abaqus

As a result of the ever increasing threat of terrorist activity, countless effort has been made to mitigate blast effect on structures so that they can withstand more severe explosion accidents without catastrophic failure, thus to reduce the number of human casualties. Indirect means such as using blast barrier to ...

ادامه نوشته »
تمامی مطالب این سایت محفوظ بوده و هر گونه کپی برداری از مطالب این سایت پیگرد قانونی دارد.
enemad-logo