In this tutorial the Simulation CFRP water storage tank under close air blast explosion in Abaqus has been investigaed. The CFRP tank is modeled as a three-dimensional shell part. The water is modeled as solid part and it’ll used as reference volume in load section to define the amount and ...
ادامه نوشته »
در این ویدئوی آموزشی به شبیه سازی انفجار به روش اویلری در نزدیکی یک مخزن کامپوزیتی حاوی آب در آباکوس و بررسی آسیب مخزن پرداخته ایم. مخزن کامپوزیتی به صورت یک استوانه شل سه بعدی طراحی شده است. هندسه آب به صورت یک جسم سالید سه بعدی و همچنین فضای ...
ادامه نوشته »
In this tutorial, the Simulation SPH explosion over the composite panel( Aluminum- Metal Foam) in Abaqus-Damage investigation – has been done. The explosive part, or the TNT is modeled as a three-dimensional solid part. The aluminum sheets are modeled as three-dimensional solid parts. The Aluminum Foam as a core is ...
ادامه نوشته »
In this tutorial, the Simulation Blast response of aluminum/thermoplastic polyurethane sandwich panels in Abaqus has been investigated. The aluminum sheets are modeled as three-dimensional solid parts. The TPU is modeled as a three-dimensional solid part. You can see a figure of the assembled parts below. History presents evidence of the ...
ادامه نوشته »
In this tutorial, the Simulation blast explosion over the composite panel(Steel-Aluminum-Ceramic-CFRP) in Abaqus has been investigated. The steel and aluminum plates are modeled as three-dimensional solid part. The silicon carbide or ceramic is modeled as a three-dimensional solid part. The CFRP is modeled as a three-dimensional solid part with four ...
ادامه نوشته »
In this tutorial, the Simulation air blast load over a composite beam( UHPFRC- Steel beam with Shear stud) in Abaqus has been investigated. The Ultra-High-Performance-Fiber-Reinforced Concrete is modeled as a three-dimensional solid part. The stud is modeled as a three-dimensional solid part. The steel beam is modeled as a three-dimensional ...
ادامه نوشته »
In this tutorial, the Simulation air blast explosion over campsite slab(UHPC-Steel) by using cohesive interaction in Abaqus has been done. The two steel covers are modeled as three-dimensional solid part. The Ultra-High-Performance concrete is modeled as a three-dimensional solid par. You can see a figure of the assembled parts below ...
ادامه نوشته »
In this tutorial, the Simulation air blast explosion over a Wood-Concrete slab reinforced with BFRP lamina in Abaqus has been investigated. The wood-concrete part is modeled as a three-dimensional solid part. The Basalt Fiber Reinforced Plastic( BFRP) is model as a shell part with eight layers. The steel reinforcement which ...
ادامه نوشته »
In this tutorial, the Simulation air blast explosion over the RC beam reinforce with Banana-Epoxy lamina in Abaqus has been investigated. The concrete beam is modeled as a three-dimensional solid part. The bar and strip are modeled as three-dimensional wire part. The Banana-Epoxy part is modeled as a three-dimensional shell ...
ادامه نوشته »
In this tutorial, the Simulation air blast explosion over the UHPC slab reinforced with BFRP composite in Abaqus has been investigated. The Ultra-High-Performance-Concrete is modeled as a three-dimensional solid part. The Basalt fiber reinforced plastic(BFRP) is modeled as a shell part with four layers. You can see a figure of ...
ادامه نوشته »
In this tutorial, the Simulation CEL explosion in the depth of soil near a solid steel pipe in Abaqus has been done. The Eulerian domain is modeled as a three-dimensional Eulerial part. The air, soil, and TNT are modeled as three-dimensional solid part. The steel pipe is model as a ...
ادامه نوشته »
In this tutorial, the Simulation air blast explosion over the composite RC slab( UHPC and NSC) in Abaqus has been investigated. the Ultra High Performance Concrete(UHPC) and Normal Strength Concrete(NSC) are modeled as three-dimensional solid part. The UHPC is the upper face and the NSC is the bottom part. The ...
ادامه نوشته »
In this tutorial, the Numerical simulation on damage mechanics behavior of a pipeline under internal explosion in Abaqus has been investigated. The steel pipe is modeled as a three-dimensional shell part. The soil is modeled as a three-dimensional solid part. Half of the steel pipe is placed inside the soil. ...
ادامه نوشته »
In this tutorial, the Simulation SPH explosion near RC slab by using CDP model couple with strain rate in Abaqus has been investigated. The RC slab is modeled as a three-dimensional solid part. The steel bars are modeled as three-dimensional wire part. The TNT is modeled as a three-dimensional solid ...
ادامه نوشته »
In this tutorial, the Simulation damage of reinforced concrete slab subjected to underwater explosion by using CEL method in Abaqus has been studied. The Eulerian part contains TNT, air, and water is modeled as a three-dimensional Eulerian part. The concrete slab is modeled as a three-dimensional solid part. The steel ...
ادامه نوشته »
In this tutorial, the Simulation internal explosion by using SPH method in Abaqus has been investigated. The outer part is modeled as a three-dimensional solid part and the explosive part is modeled as a three-dimensional solid part. The TNT is placed inside the the outer shell part and during the ...
ادامه نوشته »
In this tutorial, the Simulation CEL explosion in the depth of soil near the concrete pilled-raft structure in Abaqus has been studied. The domain is modeled as three-dimensional Eulerian part. The concrete pilled-raft is modeled as three-dimensional solid part. The air, TNT, and soil are modeled as three-dimensional solid parts. ...
ادامه نوشته »
In this tutorial, the Simulation blast resistance of the composite slab(ceramic-Aluminum foam) under sequential explosion in Abaqus has been investigated. The two ceramic layers are modeled as three-dimensional solid part. The aluminum foam as a middle part is modeled as a three-dimensional solid part. You can see a figure of ...
ادامه نوشته »
در این ویدئو به شبیه سازی انفجار متوالی روی یک پنل کامپوزیتی( سرامیک-فوم آلمینیومی) در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بوده و شامل دو لایه سرامیک به صورت سالید و یک لایه فوم آلمینیومی ضخیم در میان آنها به صورت سالید می باشد. در این ...
ادامه نوشته »
In this tutorial, the simulation air blast explosion over the composite panel(glass+PVB) in Abaqus has been investigated. Explosions in air create characteristic pressure-time signatures that propagate outwards. Upon impact of the pressure waves with annealed glass, sharp glass fragments are formed which can cause injuries. With blast loading threats, laminated ...
ادامه نوشته »
In this tutorial, the Simulation SPH explosion inside the RC column with outer steel box cover in Abaqus has been investigated. The concrete and TNT are modeled as three-dimensional solid parts. The steel box is modeled as a three-dimensional shell part. The steel bars and strips are modeled as three-dimensional ...
ادامه نوشته »
In this tutorial, the Simulation CEL explosion over composite panel(Steel and Aluminum Foam) in Abaqus has been studied. The steel sheets and aluminum foam core are modeled as three-dimensional solid parts. The TNT part is modeled as a three-dimensional solid part. The domain is modeled as a three-dimensional Eulerian part. ...
ادامه نوشته »
In this tutorial, the Simulation CEL explosion over the composite panel(Concrete-Steel bar-Steel sheet) in Abaqus has been done. The concrete is modeled as three dimensional solid part. The TNT and steel sheet are modeled as a three-dimensional solid part. The steel bars are modeled as three-dimensional wire part. The Eulerian ...
ادامه نوشته »
In this tutorial, the Simulation sequential air blast explosion over the concrete slab reinforced with CFRP sheet in Abaqus has been studied. The concrete slab is modeled as a three-dimensional solid part. The CFRP sheet is modeled as a three-dimensional shell part. You can see figures of the assembled parts ...
ادامه نوشته »
در این ویدئو به شبیه سازی انفجار در هوا به صورت پی در پی روی یک دال بتنی تقویت شده با CFRP در نرم افزار آباکوس پرداخته ایم. منظور از مدلسازی به صورت پی در پی در واقع انتقال نتایج آنالیز اولیه به آنالیز دوم و آنالیز دوم به آنالیز ...
ادامه نوشته »
In this tutorial, the Simulation of ice damage under underwater near-field explosion by using the CEL method in Abaqus has been investigated. The ice is modeled as a three-dimensional solid part. The TNT, air, and water are modeled as three-dimensional Eulerian parts. Due to the extremely short reaction time of ...
ادامه نوشته »
در این ویدئوی آموزشی به شبیه سازی انفجار زیر آب در نزدیکی لایه یخ به روش کوپل اویلری-لاگرانژی در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بوده و در این تحلیل یخ به صورت مدل سالید و سه بعدی، تی ان تی، هوا و آب نیز به ...
ادامه نوشته »
In this tutorial, the Simulation internal explosion inside the rock by using the coupled Eulerian-Lagrangian method in Abaqus has been studied. The rock and TNT are modeled as three-dimensional solid parts. The Eulerian domain is modeled as a three-dimensional Eulerian part. You can see a figure of the assembled parts ...
ادامه نوشته »
In this tutorial, the Simulation Coupled Eulerian-Lagrangian explosion on the Ice surface in interaction with water and air in Abaqus has been studied. The ice, water, air, and TNT are modeled as a three-dimensional solid part. The domain part is modeled as a three-dimensional Eulerian part. You can see figures ...
ادامه نوشته »
در این ویدئوی آموزشی به شبیه سازی انفجار به روش اویلری لاگرانژی در سطح لایه یخ(تعامل با هوا-یخ-آب) در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بوده و شامل پارت دامنه یا فضا به صورت سه بعدی و اویلرین، پارت یخ به صورت سه بعدی و سالید، ...
ادامه نوشته »
In this tutorial, the Simulation Coupled Eulerian-Lagrangian Explosion over the Reinforced Concrete Beam in Abaqus has been investigated. Blast incidents in recent years showed that most of the terrorist attacks on public structures were explosions within short standoff distance. Reinforced concrete (RC) structures are widely used in civil engineering for ...
ادامه نوشته »
در این ویدئو به شبیه سازی انفجار روی یک تیر بتنی تقویت شده با میلگرد به روش کوپل اویلری-لاگرانژی در نرم افزار آباکوس-بررسی تخریب بتن- پرداخته ایم. مدلسازی به صورت سه بعدی بوده و پارت تیر بتنی به صورت سالید و تغییر شکلپذیر، پارت خاموت و میلگرد طولی به صورت ...
ادامه نوشته »
In this tutorial, the Simulation air blast explosion over reinforced concrete column(ash and eggshell instead of cement partially) in Abaqus has been investigated. The concrete column is modeled as a three-dimensional solid part. The bar and strip are modeled as three-dimensional wire part. You can see a figure of the ...
ادامه نوشته »
در این ویدئوی آموزشی به شبیه سازی انفجار روی یک ستون بتنی(حاوی مقدار جزئی خاکستر و پوسته تخم مرغ به جای سیمان) تقویت شده با میلگرد در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی می باشد. مجموعه شامل ستون بتنی به صورت سه بعدی و سالید، میلگردهای ...
ادامه نوشته »
In this tutorial, the Simulation internal explosion inside the aluminum pipe reinforced with epoxy glue and steel cover in Abaqus has been studied. The aluminum, epoxy, and steel cover are modeled as three-dimensional solid parts. You can see a figure of the assembled parts below The aluminum material is used ...
ادامه نوشته »
در این ویدئوی آموزشی به شبیه سازی انفجار داخل لوله آلمینیومی تقویت شده با چسب و روکش فولادی در نرم افزار آباکوس پرداخته ایم. مدل شامل سه هندسه می باشد. لوله آلمینیومی داخل به صورت سه بعدی و سالید، لایه چسب به صورت سه بعدی و سالید و نهایتا پارت ...
ادامه نوشته »
In this tutorial, the Simulation air blast explosion over composite panel(UHPFR concrete-Steel plate) in Abaqus is investigated. The Ultra-High-Performance-Fiber-Reinforced concrete is modeled as a three-dimensional solid part. The steel plate is modeled as a three-dimensional solid part. The steel bars are modeled as three-dimensional wire parts. You can see figures ...
ادامه نوشته »
In this tutorial, the Simulation air blast explosion over the composite panel(Concrete+Titanium foam) in Abaqus has been investigated. The concrete and titanium foam part is modeled as three-dimensional solid parts. The metal foam is used as an energy absorber. You can see a figure of the assembled parts below To ...
ادامه نوشته »
در این ویدئوی آموزشی به شبیه سازی انفجار در هوا روی یک ساندویچ پنل (بتن-فوم تیتانیومی) در نرم افزار آباکوس پرداخته ایم. مدل سازی به صورت سه بعدی بود و شامل هندسه های بتن و فوم تیتانیومی می باشد. ابعاد دو قطعه یکسان بوده و انفجار در فاصله نزدیکی از ...
ادامه نوشته »
In this tutorial, the Numerical analysis of the dynamic response of aluminum foam core sandwich panels subjected to air blast loading in Abaqus has been investigated. The two aluminum skin sheets are modeled as a three-dimensional solid part. The aluminum foam as the core is modeled as a three dimensional ...
ادامه نوشته »
In this tutorial, the Simulation CEL explosion over a steel column and concrete foundation in interaction with soil in Abaqus has been studied. The steel column and steel plate are modeled as a three-dimensional solid part. The TNT and soil are modeled as a three-dimensional part. The embedded beam inside ...
ادامه نوشته »
In this tutorial, the Simulation CEL explosion inside the steel pipe embedded in the depth of soil in Abaqus has been investigated. The pipe is modeled as a three-dimensional shell part. The TNT, soil, and air are modeled as a three-dimensional solid part. The Eulerian part is model as a ...
ادامه نوشته »
در این ویدئوی آموزشی به شبیه سازی انفجار به روش کوپل اویلری لاگرانژی درون یک لوله فولادی مدفون در خاک در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بوده و لوله به صورت پارت شل و تغییر شکلپذیر، تی ان تی به صورت سالید ، هو به ...
ادامه نوشته »
In this tutorial, the Simulation blast explosion over the composite column in Abaqus- Damage investigation – has been studied. The model contains three deformable parts. The outer steel box as a cover is modeled as a three-dimensional shell, the middle concrete is modeled as a three-dimensional solid part and the ...
ادامه نوشته »
در این ویدئوی آموزشی به شبیه سازی انفجار در هوا در نزدیکی یک ستون مرکب(قوطی فولادی-بتن-تیر I شکل)در نرم افزار آباکوس پرداخته ایم. مدل شامل سه هندسه سه بعدی و تغییر شکل پذیر می باشد. قوطی فولادی بیرونی در نقش کاور به صورت شل و سه بعدی، هسته میانی بتنی ...
ادامه نوشته »
In this tutorial, the Simulation CEL explosion over the glass panel and damage investigation in Abaqus has been done. The glass, air, and TNT are modeled as three-dimensional parts. The Eulerian domain is modeled as a three-dimensional Eulerian part. You can see a figure of the assembled parts at below ...
ادامه نوشته »
در این ویدئوی آموزشی به شبیه سازی انفجار به روش کوپل اویلری-لاگرانژی در نزدیکی یک پنل شیشه ای در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بوده که در آن پارت شیشه،تی ان تی و هوا به صورت سه بعدی طراحی شده اند. فضای اویلری نیز به ...
ادامه نوشته »
In this tutorial, the Simulation CEL explosion over the composite foam-insulated concrete sandwich panels in Abaqus has been studied. Two concrete layers at the front and back are modeled as a three-dimensional solid part. The foam inside those two layers is modeled as a three-dimensional part and the beam as ...
ادامه نوشته »
در این ویدئو به شبیه سازی انفجار به روش کوپل اویلری-لاگرانژی روی یک پنل بتنی سه لایه با هسته فومی در نرم افزار آباکوس پرداخته ایم. مدل شامل دو قطعه بتنی سه بعدی و سالید به همراه یک قطعه فومی در میانه آنها می باشد. در هر دو قطعه بتنی ...
ادامه نوشته »
In this tutorial, numerical simulation of blast resistance of RC slab strengthened with AFRP in Abaqus-Damage investigation- has been studied. The concrete slab is modeled as a three-dimensional solid part, the AFRP is modeled as four layers composite with shell part and the embedded beam inside the concrete host is ...
ادامه نوشته »
Abaqus tutorials Abaqus tutorials