بایگانی برچسب: concrete

In this tutorial, the Simulation three point bending of a RC beam reinforced with CFRP in Abaqus has been investigated. The concrete beam is modeled as a three-dimensional solid part. The steel bars and strips are modeled as three-dimensional wire parts. The CFRP sheet is modeled as a three-dimensional shell ...

In this tutorial, the Simulation four point bending of the UHPFRC beam in Abaqus has been done. The UHPFRC beam is modeled as a three-dimensional solid part. Steel bars and strips are modeled as three-dimensional wire part. Two rigid bodies are used as hydraulic jack to apply the displacement on ...

In this tutorial, the Simulation Behavior of Beam-Column Joints Strengthened With UHPFRC under axial load in Abaqus has been investigated. The beam-column joint is modeled as three-dimensional solid part. The UHPFRC parts are modeled as three-dimensional solid as reinforcement. The strips and bars are modeled as three-dimensional wire parts. You ...

In this tutorial, the Simulation four points bending of the reinforced Rubberised Concrete(RuC) beam in Abaqus has been investigated. The RuC beam in modeled as three-dimensional solid part. The steel bars and strips are modeled as three-dimensional solid parts. Two rigid bodies are modeled to apply load instead of hydraulic ...

In this tutorial, the Simulation CEL explosion in the depth of soil near the concrete pilled-raft structure in Abaqus  has been studied. The domain is modeled as three-dimensional Eulerian part. The concrete pilled-raft is modeled as three-dimensional solid part. The air, TNT, and soil are modeled as three-dimensional solid parts. ...

In this tutorial, the Simulation dynamic compression test of a concrete column reinforced with CFRP bars in Abaqus has been investigated. The concrete column is modeled as a three-dimensional solid part. The CFRP bar is modeled as a three-dimensional solid part and two rigid bodies as supporter and hydraulic jack ...

In this tutorial, the Dynamic bending simulation of a UHPC beam reinforced with GFRP bars in Abaqus has been investigated. The Uktra-High-Performance concrete  beam is modeled as a three-dimensional solid part. The cohesive layer as an interface between UHPC and GFRP bar is modeled as a three-dimensional solid part. The ...

In this tutorial, the Simulation compression test of the UHPFRC column with internal CFRP box in Abaqus has been investigated. The Ultra-High-Performance-Fiber-Reinforced concrete is modeled as a three-dimensional solid part. The CFRP internal box is modeled as a three-dimensional shell part. Two rigid bodies are used as supporter and body ...

In this tutorial, the Simulation static bending of the UHPC beam with CFRP pipe core in Abaqus has been investigated. The concrete beam is modeled as three-dimensional solid part. The CFRP pipe core is modeled as a three-dimensional shell part. The rigid body part is used as a force body.You ...

In this tutorial, the Simulation SPH explosion inside the RC column with outer steel box cover in Abaqus has been investigated. The concrete and TNT are modeled as three-dimensional solid parts. The steel box is modeled as a three-dimensional shell part. The steel bars and strips are modeled as three-dimensional ...

In this tutorial, the Simulation Ultra-high-Performance circular short CFST column in Abaqus under compression test has been investigated.The concrete core is modeled as a three-dimensional solid part. The steel tube is modeled as a three-dimensional shell part. You can see a figure of the assembled parts below CFST columns are ...

In this tutorial, the Simulation dynamic pullout process of a steel bar form the concrete by using cohesive surface interaction in Abaqus has been studied. The steel bar and concrete are modeled as three-dimensional solid parts. You can see a figure of the assembled part below One of the main ...

In this tutorial, the Simulation Static tensile test of the concrete piece in the Abaqus has been studied. The concrete part is modeled as a three-dimensional solid part. You can see a figure of the assemble part below Concrete is a strongly heterogeneous material, which exhibits a complex nonlinear mechanical ...

In this tutorial, the Simulation masonry wall under compression and transverse load in Abaqus-Macro model has been studied. The wall is modeled as a three-dimensional solid part. The beam is modeled as a three-dimensional solid part. You can see a figure of the assembled parts below In early stages of ...

In this tutorial, the Simulation of hollow core square reinforced concrete columns wrapped with CFRP under compression in Abaqus has been studied. The concrete part is modeled as a three-dimensional solid part. The CFRP box in modeled as a three-dimensional shell part. The steel bars and strips are modeled as ...

In this tutorial, the Simulation dynamic pullout of a steel plate from the RC beam in Abaqus has been investigated. The steel plate is modeled as a three-dimensional solid part. The concrete beam is modeled as a three-dimensional solid part. The bars and strips are modeled as three-dimensional wire parts. ...

در این ویدئوی آموزشی به شبیه سازی بیرون کشیدن ورق فولادی از تیر بتنی تقویت شده با میلگرد در نرم افزار آباکوس-بررسی آسیب- پرداخته ایم. مدلسازی به صورت سه بعدی بوده و ورق فولادی به صورت یک مدل سالید و سه بعدی، تیر بتنی به صورت سالید و سه بعدی ...

In this tutorial, the Simulation CEL explosion over the composite panel(Concrete-Steel bar-Steel sheet) in Abaqus has been done. The concrete is modeled as three dimensional solid part. The TNT and steel sheet are modeled as a three-dimensional solid part. The steel bars are modeled as three-dimensional wire part. The Eulerian ...

در این ویدئوی آموزشی به شبیه سازی انفجار به روش کوپل اویلری لاگرانژی روی یک پنل مرکب(بتن-میلگرد-ورق فولادی) در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بوده و شامل پارت هدف بتنی به صورت سه بعدی و سالید، پارت ورق فولادی به صورت سه بعدی و سالید ...

In this tutorial, Simulation of Stud Connected Steel-Concrete Composite Girders Subjected to four-point bending in Abaqus has been studied. The performance of steel-concrete composite (SCC) girders for static and dynamic loads depends significantly on the force transfer mechanism at the interface between steel beam and concrete. Stud connected SCC girders consist ...

در این ویدئوی آموزشی به شبیه سازی خمش چهار نقطه ای تیر فولادی-بتن فوق توانمند به همراه گل میخ در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی می باشد و پارت تیر فولادی به همراه گل میخ ها به صورت سه بعدی و سالید ترسیم شده اند. ...

In this tutorial, the Simulation pull-out process of the deformed steel bar from the concrete in Abaqus has been investigated. The goal of this simulation is the damage and failure zone analysis in the concrete slab. The concrete part is modeled as a three-dimensional solid part. The deformed steel bar ...

در این ویدئوی آموزشی به شبیه سازی بیرون کشیدن میلگرد از بتن به صورت دینامیکی در نرم افزار آباکوس-بررسی تخریب بتن- پرداخته ایم. مدلسازی به صورت سه بعدی بوده و پارت بتن به صورت سالید و سه بعدی طراحی شده است. به دلیل پیچیدگی هندسه میلگرد آج دار، هندسه مربوط ...

In this tutorial, the Simulation fire analysis of the concrete beam in the Abaqus-Temperature and Stress analysis- has been studied. Owing to the low thermal conductivity of concrete, the concrete cover acts as fire insulation to reinforcing bars in reinforced concrete (RC) elements. In real fire incidents, concrete buildings generally ...

In this tutorial, the Simulation four-point bending of the UHPC slab reinforced with steel bars and the GFRP sheet in Abaqus has been investigated. The UHP concrete slab is modeled as a three-dimensional solid part. The steel bars are modeled as three-dimensional wire parts. The GFRP sheet with eight layers ...

در این ویدئوی آموزشی به شبیه سازی خمش چهار محوره دال بتنی فوق توانمند تقویت شده با میلگرد و ورق GFRP در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بوده و دال بتنی فوق توانمند به صورت یک پارت سه بعدی و سالید، میلگردها به صورت یک ...

In this tutorial, the Simulation sequential air blast explosion over the concrete slab reinforced with CFRP sheet in Abaqus has been studied. The concrete slab is modeled as a three-dimensional solid part. The CFRP sheet is modeled as a three-dimensional shell part. You can see figures of the assembled parts ...

در این ویدئو به شبیه سازی انفجار در هوا به صورت پی در پی روی یک دال بتنی تقویت شده با CFRP در نرم افزار آباکوس پرداخته ایم. منظور از مدلسازی به صورت پی در پی در واقع انتقال نتایج آنالیز اولیه به آنالیز دوم و آنالیز دوم به آنالیز ...

In this tutorial, the Simulation axial compression of the damaged concrete column with initial residual stress reinforced with CFRP in Abaqus has been investigated. The concrete column is modeled as a three-dimensional solid part. The CFRP box is modeled as a three-dimensional shell part. In the first simulation of the ...

در این ویدئوی آموزشی به شبیه سازی ستون بتنی با آسیب و تنش پسماند اولیه تحت بار محوری،تقویت شده با CFRP در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بوده و ستون بتنی به صورت سه بعدی و سالید و صفحات کامپوزیتی نیز به صورت شل سه ...

In this tutorial, the Simulation damaged concrete beam with initial residual stress reinforced with CFRP sheet under bending load in Abaqus has been investigated. The concrete beam is modeled as a three-dimensional solid part. The CFRP sheet is model as a three-dimensional shell part. In this tutorial, at the first ...

In this tutorial, the Simulation concrete beam-column joints under cyclic loading in Abaqus-Damage analysis- has been investigated. The concrete beam-column joint is modeled as a three-dimensional solid part. The strips and bars are modeled as three-dimensional wire parts. You can see figures of the assembled parts below The steel material ...

In this tutorial, the Simulation Coupled Eulerian-Lagrangian Explosion over the Reinforced Concrete Beam in Abaqus has been investigated. Blast incidents in recent years showed that most of the terrorist attacks on public structures were explosions within short standoff distance. Reinforced concrete (RC) structures are widely used in civil engineering for ...

در این ویدئو به شبیه سازی انفجار روی یک تیر بتنی تقویت شده با میلگرد به روش کوپل اویلری-لاگرانژی در نرم افزار آباکوس-بررسی تخریب بتن- پرداخته ایم. مدلسازی به صورت سه بعدی بوده و پارت تیر بتنی به صورت سالید و تغییر شکلپذیر، پارت خاموت و میلگرد طولی به صورت ...

In this tutorial, the Simulation air blast explosion over reinforced concrete column(ash and eggshell instead of cement partially) in Abaqus has been investigated. The concrete column is modeled as a three-dimensional solid part. The bar and strip are modeled as three-dimensional wire part. You can see a figure of the ...

در این ویدئوی آموزشی به شبیه سازی انفجار روی یک ستون بتنی(حاوی مقدار جزئی خاکستر و پوسته تخم مرغ به جای سیمان) تقویت شده با میلگرد در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی می باشد. مجموعه شامل ستون بتنی به صورت سه بعدی و سالید، میلگردهای ...

In this tutorial, the numerical simulation of a reinforced foamed concrete beam containing partial cement replacement has been investigated. Construction materials using concrete is the primary building element of structures worldwide at present. The application of concrete in civil engineering is vast ranging from construction of bridges, dams to roads ...

در این ویدئوی آموزشی به شبیه سازی خمش چهار نقطه ای تیر بتنی(حاوی ذرات جزئی جایگزین سیمان) تقویت شده در  نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بود و تیر بتنی به صورت تغییر شکلپذیر و سالید، میلگردها و خاموت ها به صورت پارت وایر سه بعدی، ...

In this tutorial, the Simulation air blast explosion over composite panel(UHPFR concrete-Steel plate) in Abaqus is investigated. The Ultra-High-Performance-Fiber-Reinforced concrete is modeled as a three-dimensional solid part. The steel plate is modeled as a three-dimensional solid part. The steel bars are modeled as three-dimensional wire parts. You can see figures ...

In this tutorial, the Simulation three points bending of High Strength Concrete(HSC) beam in Abaqus has been studied. The primary difference between high-strength concrete and normal-strength concrete relates to the compressive strength that refers to the maximum resistance of a concrete sample to applied pressure. Although there is no precise ...

In this tutorial, the Simulation four points bending of Ultra High Performance Concrete beam with steel beam core in Abaqus has been done. UHPC possesses a compressive strength greater than 21.7 ksi (150 Mpa) and a flexural strength greater than 0.72 ksi (10 Mpa) at 28 days. The concept of ...

In this tutorial, the Simulation RC column with ultra-high performance fiber reinforced concrete under a compression load in Abaqus has been investigated. The next generation of concrete, Ultra-High Performance Fibre Reinforced Concrete (UHP-FRC), exhibits exceptional mechanical characteristics. UHP-FRC has a compressive strength exceeding 150 MPa, tensile strength in the range ...

در این ویدئوی آموزشی به شبیه سازی تست فشار ستون بتنی فوق توانمند الیافی تقویت شده با میلگرد در نرم افزار آباکوس-بررسی آسیب- پرداخته ایم. مدلسازی به صورت سه بعدی بوده و پارت ستون بتنی به صورت سالید ترسیم شده است. میلگردها و خاموت ها نیز به صورت پارت وایر ...

In this tutorial, the Simulation rigid impact on the ultra-high performance fiber reinforced concrete slab in Abaqus has been investigated. UHP-FRC is a new class of concrete that has been developed to give a significantly higher material performance in comparison to its concrete counterparts. UHP-FRC exhibits superior mechanical characteristics, including ...

در این ویدئوی آموزشی به شبیه سازی برخورد جسم صلب به پنل بتنی فوق توانمند الیافی در نرم افزار آباکوس پرداخته ایم. مدل سازی به صورت سه بعدی می باشد که پارت بتن الیافی فوق توانمند به صورت سالید و تغییر شکلپذیر ترسیم شده است. میلگردهای مدفون شده در بتن ...

In this tutorial, the Simulation flexural behavior of reinforced concrete beams strengthened with ultra-high performance concrete in Abaqus has been done. Strengthening of concrete structure has become very important not only for deteriorating concrete structures, but also for strengthening new concrete structural members so that they perform much better under ...

در این ویدئوی آموزشی به شبیه سازی تست خمش تیر بتنی مسلح تقویت شده با کاور بتن فوق توانمند در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بوده که شامل دو پارت تیر بتنی و کاور بتنی فوق توانمند به صورت سالید، میلگردها و خاموت ها به ...

In this tutorial, the Simulation of ECC/Concrete Composite Beam-Column Joints under axial loading in Abaqus has been investigated. For conventional reinforced concrete frame structures, the seismic performance mostly depends on the deformation ability of key components such as beams, columns and their joint zones. Under earthquake actions, these members are ...

در این ویدئوی آموزشی به شبیه سازی اتصال تیر و ستون بتنی ساخته شده از کامپوزیت مهندسی سیمانی(ECC) در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بوده و تیر و ستون بتنی به صورت یک پارت یکپارچه طراحی شده اند. میلگردها و خاموت نیز به صورت پارت ...

In this tutorial, the Simulation circular concrete-encased concrete-filled steel tube (CFST) stub columns subjected to axial compression in Abaqus has been investigated. Compared with CFST columns, the advantages of concrete-encased CFST columns include higher stiffness, convenient connection with RC beams, and higher resistance to fire and corrosion. In addition, a ...