بایگانی برچسب: abaqus

In this tutorial, the Simulation of rigid impact on the composite panel(Aluminum and Wood) in Abaqus has been investigated. The rigid impactor is modeled as the shell part. The aluminum plate is modeled as a three-dimensional solid part. The wood layer is modeled as a three-dimensional part with some layers. ...

In this tutorial, the Simulation bending test of the steel-concrete composite beam in SRC structures considering bond-slip behavior in Abaqus has been investigated. The steel-concrete composite beam is modeled as a three-dimensional solid part. The steel reinforcements are modeled as the wire parts. You can see a figure of the ...

In this tutorial, the Simulation of ceramic plates as shielding for concrete blocks against projectile penetration(SPH method) has been done. The ceramic plate and Ultra-High-Performance-Concrete are modeled as three-dimensional solid parts. The bullet is modeled as a solid part. You can see a figure of the assembled parts below In ...

In this tutorial, the Simulation of the UHPC beam-column joint reinforced with steel angle and bolts in Abaqus has been investigated. The Ulta-High-Performance-Concrete beam-column joint is modeled as a three-dimensional solid part. The steel bar and strips are modeled as three-dimensional wire parts. The steel angle, plates, and bolts are ...

In this tutorial, the Simulation deposition behavior of multi-particle impact in the cold spraying process in Abaqus has been investigated. The aluminum particles are modeled as three-dimensional solid parts. The aluminum target also is modeled as a three-dimensional solid part. You can see a figure of the assembled parts In ...

In this tutorial, the Simulation load bearing capacity of a composite joint between a reinforced concrete column and a steel beam in Abaqus has been done. The concrete column is modeled as a three-dimensional solid part. The steel beam and column are modeled as three-dimensional solid parts. The steel bar ...

In this tutorial, the Simulation dynamic compression test of a steel column with the UHPC core in interaction with a concrete foundation in Abaqus has been investigated. The concrete foundation and column are modeled as three-dimensional solid parts. The steel column and steel stiffener angles are modeled as shell parts. ...

In this tutorial, the Simulation and Analysis of the Seismic Behavior of a Prefabricated Semirigid Steel Frame with X-Shaped Brace in Abaqus has been done. The steel column and beam are modeled as three-dimensional parts. The steel plate as stiffeners and braces are modeled as three-dimensional parts. You can see ...

In this tutorial, the Simulation cyclic loading of a steel beam-column joint with welded steel angle and stiffeners in Abaqus. Box column, steel beam angles, and stiffeners are modeled as the three-dimensional solid part. If a structural steel member is subjected to a cyclically varying load of sufficient amplitude it ...

Column base connections are among the most critical components of Steel Moment Frames, their behavior profoundly influences the overall performance of SMFs. Early investigations on Column-base connections alongside remarkable experimental programs on large-scale specimens. have provided insight into their behavior and failure modes. These tests led to the development of ...

In this tutorial, the Simulation Weapon and Trauma in the Bronze Age-Arrow head impact on human skull in Abaqus software has been investigated. From c. 2200 BC onwards, the material culture of Central Europe saw an increase in the production of weapons such as axes, halberds, daggers, and later on ...

In this tutorial, the Simulation pullout behavior of a silicon carbide (ceramic) nail from the bone in Abaqus has been investigated with two interaction methods. The ceramic nail or screw is a three-dimensional solid part. The bone is modeled as a three-dimensional solid part. Because of the part’s difficulties, they ...

In this tutorial, the Simulation of cyclic loading of a steel beam reinforced with epoxy and CFRP in Abaqus has been done. The steel beam is modeled as a three-dimensional shell part. The epoxy and CFRP are modeled as three-dimensional solid parts. You can see a figure of the assembled ...

In this tutorial, the Simulation Pull-Out test of a ribbed steel bar from the UHPC part in Abaqus has been investigated. The steel bar is imported to Abaqus from the CAD software because of the complex geometry as a solid part. The Ultra-High-Performance-Concrete is modeled as a three-dimensional solid part. ...

در این ویدئوی آموزشی به شبیه سازی بیرون کشیدن میلگرد آجدار از بتن فوق توانمند در نرم افزار آباکوس پرداخته ایم. میلگرد آجدار به صورت سه بعدی و سالید طراحی شده است. با توجه به پیچیدگی طراحی میلگرد، این هندسه در نرم افزار سالید طراحی و به آباکوس ایمپورت شده ...

In this tutorial, the Damage and crack identification in concrete by using piezoelectric material in Abaqus has been simulated. The concrete part with the initial crack is modeled as a three-dimensional solid part. The PZT parts are modeled as three-dimensional solid parts. You can see a figure of the assembled ...

در این ویدئوی آموزشی به شبیه سازی پیدا کردن آسیب و ترک در بتن با استفاده از اثر انتشار موج و پیزوالکتریک در نرم افزار آباکوس پرداخته ایم. مدل سازی شامل هندسه بتن با ترک اولیه به صورت سالید و سه بعدی، دو هندسه پیزوالکتریک به صورت سالید و سه ...

In this example, the Simulation air blast load over a composite beam(Wood+Aluminum) in Abaqus has been investigated. The wood slab is modeled as a  three-dimensional solid part with tension and compression zones. The aluminum beam is modeled as a three-dimensional shell part. You can see a figure of the assembled ...

In this tutorial, the Simulation wood timber beam under fire and mechanical bending load in Abaqus has been done. The timber beam is modeled as a three-dimensional solid part. You can see a figure of the assembled parts below Along with the innovation of new building systems, how we design ...

In this tutorial, the Simulation wood-steel plate connection with a nail under tension load in Abaqus has been investigated. The steel plate and nail are modeled as three-dimensional solid parts. The wooden plate also is a three-dimensional part. You can see a figure of the assembled parts below Cross-laminated timber ...

In this tutorial, the Simulation fire analysis of a steel joint with bolt connectors in Abaqus has been investigated. The two steel plates are modeled as three-dimensional solid parts. The bolts are modeled as three-dimensional parts. You can see a figure of the assembled parts below Steel has been at ...

In this tutorial, the Simulation air blast load over a reinforced concrete beam with a spiral GFRP bar in Abaqus has been investigated. The concrete beam is modeled as a three-dimensional solid part, the spiral GFRP is a solid part also. The steel reinforcements are modeled as three-dimensional wire parts. ...

In this tutorial, the fire analysis of a composite beam (RC concrete slab+ steel beam) under bending load in Abaqus has been done. The concrete slab is modeled as a three-dimensional solid part. The steel reinforcements are modeled as wire parts. The steel beam is modeled as a three-dimensional solid ...

In this tutorial, the Simulation compression test of a concrete column reinforced with GFRP bars and strips in Abaqus has been investigated. The concrete column is modeled as a three-dimensional solid part. The GFRP bars and strips are modeled as three-dimensional solid parts. You can see a figure of the ...

In this tutorial, the Fire simulation in Abaqus-Thermal and Structural analysis of a steel frame has been investigated. The steel beam is modeled as an I-shape three-dimensional part. The two box columns are modeled as three-dimensional parts. You can see a figure of the assembled parts below Steel has been ...

در این ویدئوی آموزشی به شبیه سازی آتش سوزی در یک قاب فولادی تحت بار مکانیکی(تحلیل دما-تنش) در نرم افزار آباکوس پرداخته ایم. مدل شامل دو ستون قوطی شکل و یک تیر در وسط دهانه می باشد که همگی هندسه ها به صورت سه بعدی طراحی شده اند. در شکل ...

In this tutorial, the Investigation on the repeated impact responses of circular concrete-filled double-tube (CFDT) members in Abaqus have been studied. The two concrete cores are modeled as three-dimensional solid parts. The two steel tubes are modeled as three-dimensional solid parts. The rigid hammer as an impact is used also. ...

In this tutorial, the Simulation air blast explosion over a composite panel(Silica glass-Aluminum-CFRP) in Abaqus has been investigated. The silica glass is modeled as a three-dimensional part. The aluminum as the middle layer is modeled as a three-dimensional solid part. The CFRP as the backplate is modeled as a shell ...

In this tutorial, the Simulation cyclic loading of a steel beam-column joint filled with the UHPC and welded stiffeners in Abaqus has been done. The Ultra-High-Performance-Concrete is modeled as a three-dimensional solid part. The steel beam and column are modeled as three-dimensional shell parts. The stiffeners are modeled as three-dimensional ...

In this tutorial, the Simulation of a steel bullet impact on the composite panel (Boron carbide-CFRP-Gelatin) in Abaqus has been investigated. The bullet is modeled as a three-dimensional solid part. The boron carbide and gelatin are modeled as three-dimensional solid parts. The CFRP is modeled as a shell with eight ...

In this tutorial, the Finite element analysis of the progressive collapse of reinforced, Ultra-High-Performance-Concrete frame has been investigated. The UHPC frame is modeled as a three-dimensional solid part. The steel reinforcements are modeled as three-dimensional wire parts. You can see a figure of the assembled parts below Progressive collapse is ...

In this tutorial, the Simulation of a CEL large-scale bomb explosion (Nuclear detonation) near a building in Abaqus has been investigated. A nuclear explosion releases vast amounts of energy in the form of blasts, heat, and radiation. An enormous Shockwave reaches speeds of many hundreds of kilometers an hour. The blast ...

در این ویدئوی آموزشی به شبیه سازی انفجار اویلری در مقیاس اتمی و بزرگ در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بوده و شامل پارت های هوا،خاک،ماده منفجره و دیواره بتنی با ضخامت و ابعاد بزرگ می باشد. دیواره بتنی با ضخامت زیاد به منظور بررسی ...

In this tutorial, the Simulation compression test of a composite column(wood-uhpc-steel cover) in Abaqus has been investigated. The wood core and Ulta-High-Performance-Concrete parts are modeled as three-dimensional solid parts. The steel cover is modeled as a shell part. You can see a figure of the assembled parts below Wood columns ...

In this tutorial, the Simulation Phantom aircraft collision with a concrete wall in Abaqus has been investigated. The concrete wall is modeled as a three-dimensional solid part. The Phantom is imported as an input geometry to Abaqus as a shell part. You can see a figure of the parts below ...

In this tutorial, the Simulation air blast analysis of a composite column(wood-concrete-CFRP) in Abaqus has been investigated. The wood is modeled as a three-dimensional solid part with two layers of tension and compression. The concrete is modeled as a three-dimensional solid part. The steel bars and strips are modeled as ...

در این ویدئوی آموزشی به شبیه سازی انفجار در نزدیکی یه ستون مرکب(چوب-بتن تقویت شده-CFRP) در نرم افزار آباکوس پرداخته ایم. مدلسازی شامل هسته چوبی به صورت سه بعدی، بتن به صورت سه بعدی و سالید، میلگرد و خاموت ها به صورت سیمی و سه بعدی و در نهایت کاور ...

In this tutorial, the Simulation bending test of a composite beam(wood-UHPC-Steel) in Abaqus has been done. The wood is modeled as a three-dimensional solid part with two layers, the top layer is in compression, and the bottom is in tension. The Ultra-High-Performance-Concrete is modeled as a three-dimensional solid part. The ...

در این ویدئوی آموزشی به شبیه سازی خمش سه محوره تیر مرکب(چوب-بتن فوق توانمند-فولاد) در نرم افزار آباکوس پرداخته ایم. مدلسازی شامل هسته چوبی دو لایه به صورت سالید، لایه میانی از بتن فوق توانمند به صورت سالید و در نهایت لایه بیرونی از فولاد به صورت شل می باشد. ...

 In this tutorial, the Simulation under-water explosion by using the CEL method near a floating structure in Abaqus has been investigated. The aluminum hull is modeled as a three-dimensional thick shell part. The Soil, TNT, Water, and Air are modeled as three-dimensional parts inside the Eulerian domain. You can see ...

در این ویدئوی آموزشی به شبیه سازی انفجار زیر آب به روش کوپل اویلری لاگرانژی در نزدیکی یک سازه آلمینیومی در آباکوس پرداخته ایم. مدلسازی شامل فضای اویلری با پارت های تی ان تی، آب،هوا و خاک می باشد. در این مثال تمامی پارت به صورت سه بعدی می باشند. ...

In this tutorial, the  Simulation CEL explosion near a stone wall covered with cloth, and concrete in Abaqus has been investigated. The stone wall and cloth, concrete are modeled as three-dimensional solid parts. The TNT is a solid sphere, and the Eulerian domain is a 3D body. You can see ...

در این ویدئوی آموزشی به شبیه سازی انفجار به روش کوپل اویلری لاگرانژی در نزدیکی دیواره سنگی کاور شده با بتن پارچه ای در نرم افزار آباکوس پرداخته ایم. مدلسازی شامل دیواره سنگی به صورت سالید و سه بعدی، کاور بتن پارچه ای به صورت سالید و سه بعدی، ماده ...

In this tutorial, the Simulation of RC Beams during Fire Events Using a Fully Coupled thermal stress Analysis in Abaqus has been studied. The concrete beam is modeled as a three-dimensional solid part. The steel reinforcements are modeled as wire parts. You can see a figure of the assembled parts ...

در این ویدئوی آموزشی به شبیه سازی آتش سوزی تیر بتنی مسلح به میلگرد به روش کوپله حرارتی مستقیم در نرم افزار آباکوس پرداخته ایم. مدلسازی شامل تیر بتنی به صورت سالید و سه بعدی می باشد. میلگردها و خاموت نیز به صورت سه بعدی و سیمی طراحی شد اند. ...

In this tutorial, the Simulation of the Push-Out test on a new shear connector of the I-Shape in Abaqus has been investigated. The concrete is modeled as a three-dimensional solid part. The steel reinforcements are modeled as wire parts. The steel beam and connector are modeled as three-dimensional solid part. ...

در این ویدئوی آموزشی به شبیه سازی تست push out یک اتصال دهنده برشی در سازه فولادی-بتنی در آباکوس پرداخته ایم. مدلسازی شامل تیر یا ستون فولادی به صورت سه بعدی و سالید، اتصال دهنده برشی به صورت سالید و به بعدی، پارت بتنی به صورت سالید و سه بعدی ...

In this tutorial, the Simulation air blast load over a RC beam reinforced with Cloth Concrete cover in Abaqus has been done, The normal concrete core is modeled as a three-dimensional solid part. The cloth concrete part is modeled as a three-dimensional patrt. The steel bar and strips are modeled ...

در این ویدئوی آموزشی به شبیه سازی انفجار روی یک تیر بتنی تقویت شده با میلگرد و کاور بتن پارچه ای در آباکوس پرداخته ایم. هسته بتنی به صورت سالید و سه بعدی، کاور بتن پارچه ای به صورت سالید و سه بعدی، میلگردهای طولی و خاموت ها نیز به ...

In this tutorial, the Simulation full three Dimensional fire analysis of a Reinforced concrete beam in Abaqus-Sequential Coupling Technique- has been investigated. The concrete beam is modeled as a three-dimensional solid part,. The longitudal bar and strips are modeled as three-dimensional solid part. You can see a figure of the ...