In this tutorial, the Simulation axial compression of the damaged concrete column with initial residual stress reinforced with CFRP in Abaqus has been investigated. The concrete column is modeled as a three-dimensional solid part. The CFRP box is modeled as a three-dimensional shell part. In the first simulation of the ...
ادامه نوشته »
در این ویدئوی آموزشی به شبیه سازی ستون بتنی با آسیب و تنش پسماند اولیه تحت بار محوری،تقویت شده با CFRP در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بوده و ستون بتنی به صورت سه بعدی و سالید و صفحات کامپوزیتی نیز به صورت شل سه ...
ادامه نوشته »
In this tutorial, the Simulation damaged concrete beam with initial residual stress reinforced with CFRP sheet under bending load in Abaqus has been investigated. The concrete beam is modeled as a three-dimensional solid part. The CFRP sheet is model as a three-dimensional shell part. In this tutorial, at the first ...
ادامه نوشته »
در این ویدئوی آموزشی به شبیه سازی تقویت تیر بتنی با آسیب و تنش پسماند اولیه با ورق CFRP تحت خمش چهار نقطه ای در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بوده و شامل دو پارت تیر بتنی به صورت سه بعدی و سالید و پارت ...
ادامه نوشته »
In this tutorial, the Simulation drilling hole process in the Abaqus by using a rigid drill tool has been studied. Concrete drilling, or core drilling, is the process of drilling precise holes in concrete floors or walls, or in any other paved surfaces or structures. The concrete is modeled as a three-dimensional solid part. ...
ادامه نوشته »
در این ویدئوی آموزشی به شبیه سازی سوراخ کاری بتن با استفاده از مته در نرم افزار آباکوس پرداخته ایم. بتن به صورت یک پارت سه بعدی و سالید در نظر گرفته شده است. پارت مته به دلیل پیچیدگی هندسه نیاز به طراحی در نرم افزاری مانند سالیدورک دارد، لذا ...
ادامه نوشته »
In this tutorial, the Simulation concrete beam-column joints under cyclic loading in Abaqus-Damage analysis- has been investigated. The concrete beam-column joint is modeled as a three-dimensional solid part. The strips and bars are modeled as three-dimensional wire parts. You can see figures of the assembled parts below The steel material ...
ادامه نوشته »
در این ویدئوی آموزشی به شبیه سازی بارگذاری تکراری روی اتصال تیر به ستون بتنی در نرم افزار آباکوس- بررسی آسیب- پرداخته ایم. مدلسازی به صورت سه بعدی بوده که در آن تیر بتنی به همراه ستون به صورت سه بعدی و تغییر شکل پذیر ترسیم شده است. میلگردها و ...
ادامه نوشته »
In this tutorial, the Simulation Coupled Eulerian-Lagrangian Explosion over the Reinforced Concrete Beam in Abaqus has been investigated. Blast incidents in recent years showed that most of the terrorist attacks on public structures were explosions within short standoff distance. Reinforced concrete (RC) structures are widely used in civil engineering for ...
ادامه نوشته »
در این ویدئو به شبیه سازی انفجار روی یک تیر بتنی تقویت شده با میلگرد به روش کوپل اویلری-لاگرانژی در نرم افزار آباکوس-بررسی تخریب بتن- پرداخته ایم. مدلسازی به صورت سه بعدی بوده و پارت تیر بتنی به صورت سالید و تغییر شکلپذیر، پارت خاموت و میلگرد طولی به صورت ...
ادامه نوشته »
In this tutorial, the Simulation air blast explosion over reinforced concrete column(ash and eggshell instead of cement partially) in Abaqus has been investigated. The concrete column is modeled as a three-dimensional solid part. The bar and strip are modeled as three-dimensional wire part. You can see a figure of the ...
ادامه نوشته »
در این ویدئوی آموزشی به شبیه سازی انفجار روی یک ستون بتنی(حاوی مقدار جزئی خاکستر و پوسته تخم مرغ به جای سیمان) تقویت شده با میلگرد در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی می باشد. مجموعه شامل ستون بتنی به صورت سه بعدی و سالید، میلگردهای ...
ادامه نوشته »
In this tutorial, the simulation elliptical ultra-high-performance concrete-filled steel tabular column under compression load in Abaqus has been investigated. Elliptical concrete-filled steel tubular (CFST) columns have recently attracted significant attention because of their increased strength and stiffness compared with empty elliptical hollow sections. The UHPC core is modeled as a ...
ادامه نوشته »
در این ویدئوی آموزشی به شبیه سازی تست فشار محوری ستون بیضی شکل مرکب(بتن فوق توانمند با روکش فولادی) در نرم افزار آباکوس پرداخته ایم. هسته بتنی بیضی شکل به صورت پارت سالید سه بعدی، روکش فلزی به صورت پارت شل سه بعدی تغییر شکلپذیر و در نهایت اجسام صلب ...
ادامه نوشته »
In this tutorial, the numerical simulation of a reinforced foamed concrete beam containing partial cement replacement has been investigated. Construction materials using concrete is the primary building element of structures worldwide at present. The application of concrete in civil engineering is vast ranging from construction of bridges, dams to roads ...
ادامه نوشته »
در این ویدئوی آموزشی به شبیه سازی خمش چهار نقطه ای تیر بتنی(حاوی ذرات جزئی جایگزین سیمان) تقویت شده در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بود و تیر بتنی به صورت تغییر شکلپذیر و سالید، میلگردها و خاموت ها به صورت پارت وایر سه بعدی، ...
ادامه نوشته »
In this tutorial, the Simulation air blast explosion over composite panel(UHPFR concrete-Steel plate) in Abaqus is investigated. The Ultra-High-Performance-Fiber-Reinforced concrete is modeled as a three-dimensional solid part. The steel plate is modeled as a three-dimensional solid part. The steel bars are modeled as three-dimensional wire parts. You can see figures ...
ادامه نوشته »
در این ویدئوی آموزشی به شبیه سازی انفجار در هوا روی یک پنل فولادی-بتن فوق توانمند الیافی در نرم افزار آباکوس پرداخته ایم. مدلسازی شامل سه هندسه می باشد. دال بتنی فوق توانمند الیافی به صورت سه بعدی و تغییر شکلپذیر، ورق فولادی محافظ به صورت سه بعدی و تغییر ...
ادامه نوشته »
In this tutorial, the Simulation three points bending of High Strength Concrete(HSC) beam in Abaqus has been studied. The primary difference between high-strength concrete and normal-strength concrete relates to the compressive strength that refers to the maximum resistance of a concrete sample to applied pressure. Although there is no precise ...
ادامه نوشته »
در این ویدئوی آموزشی به شبیه سازی خمش سه نقطه ای تیر بتنی با مقاومت بالا(HSC) تقویت شده با میلگرد در نرم افزار آباکوس پرداخته ایم. مدلسازی به صورت سه بعدی بوده که در آن تیر بتنی به صورت جسم تغییر شکلپذیر و سالید طراحی شده است. میلگردهای طولی نیز ...
ادامه نوشته »
In this tutorial, the Simulation four points bending of Ultra High Performance Concrete beam with steel beam core in Abaqus has been done. UHPC possesses a compressive strength greater than 21.7 ksi (150 Mpa) and a flexural strength greater than 0.72 ksi (10 Mpa) at 28 days. The concept of ...
ادامه نوشته »
در این ویدئوی آموزشی به شبیه سازی خمش چهار نقطه ای تیر بتنی فوق توانمند با هسته تیر فولادی در نرم افزار آباکوس پرداخته ایم. مدل شامل چندین هسته از قبیل تیر بتنی به صورت سه بعدی و سالید، تیر فولادی به صورت سه بعدی و سالید که در مرکز ...
ادامه نوشته »
In this tutorial, the Simulation RC column with ultra-high performance fiber reinforced concrete under a compression load in Abaqus has been investigated. The next generation of concrete, Ultra-High Performance Fibre Reinforced Concrete (UHP-FRC), exhibits exceptional mechanical characteristics. UHP-FRC has a compressive strength exceeding 150 MPa, tensile strength in the range ...
ادامه نوشته »
در این ویدئوی آموزشی به شبیه سازی تست فشار ستون بتنی فوق توانمند الیافی تقویت شده با میلگرد در نرم افزار آباکوس-بررسی آسیب- پرداخته ایم. مدلسازی به صورت سه بعدی بوده و پارت ستون بتنی به صورت سالید ترسیم شده است. میلگردها و خاموت ها نیز به صورت پارت وایر ...
ادامه نوشته »
In this tutorial, the Simulation rigid impact on the ultra-high performance fiber reinforced concrete slab in Abaqus has been investigated. UHP-FRC is a new class of concrete that has been developed to give a significantly higher material performance in comparison to its concrete counterparts. UHP-FRC exhibits superior mechanical characteristics, including ...
ادامه نوشته »
In this tutorial, the Simulation flexural behavior of reinforced concrete beams strengthened with ultra-high performance concrete in Abaqus has been done. Strengthening of concrete structure has become very important not only for deteriorating concrete structures, but also for strengthening new concrete structural members so that they perform much better under ...
ادامه نوشته »
In this tutorial, the Simulation of ECC/Concrete Composite Beam-Column Joints under axial loading in Abaqus has been investigated. For conventional reinforced concrete frame structures, the seismic performance mostly depends on the deformation ability of key components such as beams, columns and their joint zones. Under earthquake actions, these members are ...
ادامه نوشته »
In this tutorial, the Simulation circular concrete-encased concrete-filled steel tube (CFST) stub columns subjected to axial compression in Abaqus has been investigated. Compared with CFST columns, the advantages of concrete-encased CFST columns include higher stiffness, convenient connection with RC beams, and higher resistance to fire and corrosion. In addition, a ...
ادامه نوشته »
In this tutorial, the Simulation axial compression of the Ultra-High-Performance Fiber Reinforced Concrete Column in Abaqus has been investigated. The UHPFRC column is modeled as a three-dimensional solid part with a circular form. The bars or beams embedded inside the concrete column are modeled as three-dimensional wire parts. Two rigid ...
ادامه نوشته »
In this tutorial, the simulation dynamic bending behavior of the concrete pipe strengthening with epoxy lining in Abaqus has been investigated. Pipelines are an essential component of a city’s infrastructure. Compared to other structures, buried infrastructures have a higher risk of deterioration due to the particularly harsh surrounding environment. Deterioration ...
ادامه نوشته »
In this tutorial, the Simulation blast explosion over the composite column in Abaqus- Damage investigation – has been studied. The model contains three deformable parts. The outer steel box as a cover is modeled as a three-dimensional shell, the middle concrete is modeled as a three-dimensional solid part and the ...
ادامه نوشته »
In this tutorial, finite element analysis of smooth particle hydrodynamics for application to projectile impact on cementitious material has been investigated. The performance of brittle, cementitious armor panels under high-rate impact is dependent on a wide range of variables including but not limited to projectile and target geometry, impact velocity, ...
ادامه نوشته »
In this tutorial, the Simulation damage phenomenon on the concrete-filled double skin steel box under dynamic bending in Abaqus has been studied. The internal and external steel boxes are modeled as a tree-dimensional shell part. The concrete is modeled as a three-dimensional solid part. You can see a figure of ...
ادامه نوشته »
In this tutorial, Simulation Behavior of thin-walled dodecagonal section double skin concrete-filled steel tubular beam-columns in Abaqus had been studied. The steel sections are modeled as a three-dimensional shell part and the concrete is modeled as a three-dimensional solid part. You can see a figure of the assembled parts at ...
ادامه نوشته »
In this tutorial, the simulation composite column(steel beam and concrete)under cyclic loading in Abaqus has been studied. The steel beam and the concrete parts are modeled as three-dimensional solid parts. You can see a figure of the assembled parts at below The steel material is used for the steel beam ...
ادامه نوشته »
In this tutorial Simulation Couple Eulerian Lagrangian explosion over RC column with steel beam core in Abaqus has been studied. The concrete column and steel beam are modeled as three dimensional part,the domain is modeled as eulerian part with TNT and the bars are modeled as three dimensional wire part ...
ادامه نوشته »
In this tutorial Simulation couple Eulerian Lagrangian explosion over concrete column with foundation in Abaqus has been studied.The concrete column and foundation are modeled as three dimensional part. The eulerian domain is modeled as eulerian part and TNT as sphere in it near the column. The beams as reinforcement are ...
ادامه نوشته »
In this tutorial Simulation dynamic tensile test of a concrete piece in Abaqus has been studied. The concrete part is modeled as three dimensional part. Normally concrete damage plasticity is used to model compression and tensile damage on the concrete pieces, during static or dynamic analysis. In this tutorial dynamic ...
ادامه نوشته »
In this tutorial Numerical simulation modeling of high velocity impact applied to reinforced concrete panel has been investigated. It is well known that concrete is much stronger in terms of compression than in tension. Because of its high com-pressive strength, and to enhance its tensile strength, tensile reinforcements are added ...
ادامه نوشته »
In this tutorial Simulation of p-section concrete beams under contact explosion(CEL) conditions in Abaqus has been studied. Reinforced concrete bridges are the most common type of bridges and have a simple structure, low cost and long durability. Among these bridges, reinforced concrete bridges composed of p-section bridge components are among the ...
ادامه نوشته »
Abaqus tutorials Abaqus tutorials