بایگانی برچسب: abaqus CEL explosion

This tutorial simulated a CEL explosion over a composite RC column with an X-shaped steel core in Abaqus. The concrete and steel X-shaped columns are modeled as three-dimensional solid parts. The steel reinforcements are modeled as wire parts, and the domain that contains explosive charge is modeled as an Eulerian ...

Simulation air blast explosion over an aluminum box reinforced with CFRP layers in Abaqus has been studied in this tutorial. The aluminum box is modeled as a three-dimensional solid part. The CFRP layers are modeled as four separated part with different orientations. You can see figures of the assembled parts ...

Numerical simulation of concrete-filled double skin steel tubular (CFDST) structure subjected to underwater explosion loading in Abaqus has been don in this example. The concrete column is modeled as a three-dimensional solid part. The inner and outer steel tubes are modeled as shell parts. The air, water, and TNT are ...

In this tutorial, the Simulation of the CFRP blanket effect on reducing the deformation of buried pipelines exposed to the subsurface explosion in Abaqus has been investigated. The air, soil, and TNT are modeled as three-dimensional parts inside an Eulerian part. The steel pipe is modeled as a three-dimensional part. ...

In this tutorial, the Simulation of a CEL large-scale bomb explosion (Nuclear detonation) near a building in Abaqus has been investigated. A nuclear explosion releases vast amounts of energy in the form of blasts, heat, and radiation. An enormous Shockwave reaches speeds of many hundreds of kilometers an hour. The blast ...

 In this tutorial, the Simulation under-water explosion by using the CEL method near a floating structure in Abaqus has been investigated. The aluminum hull is modeled as a three-dimensional thick shell part. The Soil, TNT, Water, and Air are modeled as three-dimensional parts inside the Eulerian domain. You can see ...

In this tutorial the Simulation rocket impact and explosion over a concrete panel in Abaqus has been investigated. The concrete panel is modeled as a three-dimensional solid part. The rocket is modeled as a three-dimensional shell part, and the TNT is modeeld as a solid part. You can see a ...

In this tutorial, the Simulation air blast explosion over a steel-UHPC-steel sandwich composite beam stud connectors in Abaqus has been studied. The two steel plates with studs are modeled as three-dimensional solid part. The UHPC is modeled as a three-dimensional solid part as a core of the sandwich beam. You ...

In this tutorial, the Simulation sequential CEL explosion in the depth of soil over the RC slab in Abaqus has been investigated. The concrete slab is modeled as three-dimensional solid part, the steel reinforcement is modeled as wire part. The Soil, and TNT are modeled as three-dimensional solid parts. The ...

In this tutorial, the Simulation CEL explosion in the depth of water near the aluminum hull in Abaqus- three sea mine explosion- has been done. The domain is modeled as a three-dimension Eurlerian part. The hull is modeled as a three-dimensional shell part. The water and three TNT parts are ...

In this tutorial the explosion simulation near the reinforced concrete wall with green composite-SPH method- has been investigated. The TNT part is modeled as a three-dimensional solid part. The concrete wall or slab is modeled as three-dimensional solid part, the green composite part with eight layers is modeld as three-dimensional ...

In this tutorial the Simulation CEL explosion inside the CFRP composite vessel in Abaqus has been investigated. The CFRP vessel is modeled as a three-dimensional shell part in sixteen layers with different oreintation. The TNT part is modeled as a three-dimensional solid part. The surounding is modeled as an Eurlerian ...

In this course, we explained the Coupled Eulerian-Lagrangian, Smooth Particle Hydrodynamic, Acoustic, and CONWEP blast procedure in detail during twenty-three separate tutorials which you can see their title below. We provide this course because some people use our tutorials to create courses on Udemy but if you ask them questions ...

In this tutorial, the Simulation damage of reinforced concrete slab subjected to underwater explosion by using CEL method in Abaqus  has been studied. The Eulerian part contains TNT, air, and water is modeled as a three-dimensional Eulerian part. The concrete slab is modeled as a three-dimensional solid part. The steel ...

در این ویدئوی آموزشی به شبیه سازی انفجار زیر آب به روش CEL در نزدیکی یک دال بتنی تقویت شده در نرم افزار آباکوس پرداخته ایم. دال بتنی به صورت سه بعدی و سالید، میلگردها به صورت سه بعدی و سیمی و پارت محیط انفجار نیز به صورت سه بعدی ...

In this tutorial, the Simulation CEL explosion over composite panel(Steel and Aluminum Foam) in Abaqus  has been studied. The steel sheets and aluminum foam core are modeled as three-dimensional solid parts. The TNT part is modeled as a three-dimensional solid part. The domain is modeled as a three-dimensional Eulerian part. ...

In this tutorial, the Simulation CEL explosion over the composite panel(Concrete-Steel bar-Steel sheet) in Abaqus has been done. The concrete is modeled as three dimensional solid part. The TNT and steel sheet are modeled as a three-dimensional solid part. The steel bars are modeled as three-dimensional wire part. The Eulerian ...

In this tutorial, the Simulation Coupled Eulerian-Lagrangian explosion on the Ice surface in interaction with water and air in Abaqus has been studied. The ice, water, air, and TNT are modeled as a three-dimensional solid part. The domain part is modeled as a three-dimensional Eulerian part. You can see figures ...

In this tutorial, the Simulation Coupled Eulerian-Lagrangian Explosion over the Reinforced Concrete Beam in Abaqus has been investigated. Blast incidents in recent years showed that most of the terrorist attacks on public structures were explosions within short standoff distance. Reinforced concrete (RC) structures are widely used in civil engineering for ...

In this tutorial Simulation underwater explosion near a concrete dam by using the CEL method in Abaqus has been investigated. The dam is modeled as a three dimensional part, The TNT, water, and air are modeled as the Eulerian part. You can see a figure of the assembled parts at ...

In this tutorial Masonry wall behavior under couple Eulerian-Lagrangian explosion in Abaqus has been simulated.Numerical simulations are used extensively for solving a vast variety of dynamic problems associated with explosions, such as gaseous or condensed charge detonations followed by pressure wave propagation through the ambient air. Utilizing these methods, it ...

In this tutorial Simulation couple Eulerian Lagrangian explosion over concrete column with foundation in Abaqus has been studied.The concrete column and foundation are modeled as three dimensional part. The eulerian domain is modeled as eulerian part and TNT as sphere in it near the column. The beams as reinforcement are ...

In this tutorial simulation underwater explosion based on Eulerian finite element approach in Abaqus has been investigated.The main phenomena of underwater explosion includes shock wave formation and propagation, bubble pulsation and migration.Generally, considering the differences of time sequence and time scale, the process of underwater explosion is usually divided into ...

In this tutorial Simulation of hollow steel piles subjected to buried blast loading(CEL explosion) in Abaqus has done.A pile is a load bearing component of a structure that transfers the structural load to the hard soil or rock underground. The modern human civilization and smart infrastructure depend largely on the ...

In this tutorial Simulation of p-section concrete beams under contact explosion(CEL) conditions in Abaqus has been studied. Reinforced concrete bridges are the most common type of bridges and have a simple structure, low cost and long durability. Among these bridges, reinforced concrete bridges composed of p-section bridge components are among the ...

In this tutorial numerical simulation of CEL explosion over metal tube in the depth of water in Abaqus has been investigated.An underwater explosion can be divided into two stages: the shock wave and the bubble pulse. Although both inflict severe damage to the adjacent structure, their damage mechanisms are different. Generally, the ...