تمامی مطالب این سایت محفوظ بوده و هر گونه کپی برداری از مطالب این سایت پیگرد قانونی دارد.
خانه / Abaqus tutorial videos / Abaqus advanced tutorials / Simulation axial compression of the damaged concrete column with initial residual stress reinforced with CFRP in Abaqus

Simulation axial compression of the damaged concrete column with initial residual stress reinforced with CFRP in Abaqus

In this tutorial, the Simulation axial compression of the damaged concrete column with initial residual stress reinforced with CFRP in Abaqus has been investigated. The concrete column is modeled as a three-dimensional solid part. The CFRP box is modeled as a three-dimensional shell part. In the first simulation of the first analysis, the column is modeled under the axial load. The damage and residual stresses from that simulation are written to be used in the second simulation as an initial condition. In the second simulation, the CFRP box is added to the concrete column and it covered the damaged zones of the column. You can see a figure of the assembled parts below

The concrete damaged plasticity model is used to define concrete behavior under axial loading. The Hashin’s damage criterion is used to model CFRP behavior. In the first simulation, two static steps are used, in the first step the axial load is applied and in the second step, the load is deactivated. The fixed boundary condition is assigned to the bottom of the column and axial load to the top surface. After the first simulation, the results such as stress, strain, tensile, and compression damage are achievable. These results should be imported to the second simulation as an initial condition. In the second simulation, the damaged column with initial residual stress is analyzed. The CFRP box is added to the column to cover the damage and increases the force capacity. In the second simulation, the axial load is increased to achieve the failure of the assembled parts.

After the simulation, the results from the first and the second analysis can be compared. You can see some figures for the results below

You can provide CAE ,INP,and English video files of this simulation here. The cost of these files is Twenty-Eight Euros. you can click on the bellow bottom to beginning process

You can purchase the tutorial through a PayPal account, a Visa, or a Master card,  just before payment,send me an email to this address: karampourp@gmail.com

 

درباره ی Abaqus

همچنین ببینید

Simulation Exposed column base plate connections in moment frames in Abaqus

In this tutorial, the Simulation Exposed column base plate connections in moment frames in Abaqus ...

دیدگاهتان را بنویسید

نشانی ایمیل شما منتشر نخواهد شد. بخش‌های موردنیاز علامت‌گذاری شده‌اند *

تمامی مطالب این سایت محفوظ بوده و هر گونه کپی برداری از مطالب این سایت پیگرد قانونی دارد.
enemad-logo